Ceramex cleaning process is very intense. We use a variety of stone cleaning products to remove all kinds of stains, such as black and green mildew, stains, oils and rust. We then inspect the surface for layers that are peeling off that need to be removed before the sealer can be applied.
Once all has been removed and the stone is dry we then soak the stone with as much sealer as it will absorb. We generally try to apply two coats to all of the stones; some may require three or even four applications.
All stone should always be sealed immediately after installation, especially around swimming pools. This will give it protection from chlorine, saltwater penetration and stains. Sealers are not bulletproof and once a sealer is applied it needs to be maintained regularly. It will generally need to be applied every 3 to five years depending on the conditions of the installed areas and foot traffic.
Preview before and after photos of the Sandstone cleaning, sealing and re grouting that was completed recently for Waitara Retirement Village, Waitara.
Features and Benefits: DRY TREAT SEALERS
- High performance protection against saltwater damage
- For natural stone surfaces around saltwater pool
- Protection against water-based stains
- Preserves natural look and texture
- Water-based formula
- Long lasting: 3-5 years between applications